Location:Home > Products > Point Rubber Valves and Pressure Drums

Point Rubber Valves and Pressure Drums

Pressure drums

1. The pressure drums can be divided into: SUS304 stainless steel pressure drums and carbon steel pressure drums. 2. All SUS304 stainless steel pressure drums can directly pour the liquid into the barrel for use, with high corrosion resistance; 3. The pressure barrel of carbon steel has a low cost ratio. The liquid can be packaged together and put into the pressure barrel for use.

  • Related products
  • Technical parameters

    1.jpg

    ◇ Selection of gum outlet method according to the viscosity of the fluid, as thin as water select the upper gum outlet method, conversely poor fluidity choose the bottom gum outlet method;
    ◇ There are four two-tooth holes on the cover of the standard pressure tank when leaving the factory, including a safety valve, a pressure regulating valve, an outlet hole and a pressure relief valve.
    ◇ It is suggested that the glue should not be poured into the pressure drum directly. Instead, use stainless steel or put the glue package into the pressure drum.