The main composition of the heating preheating device of the dispensing machine: 30CC cylinder heater +30CC cylinder preheater + temperature controller; The machine is small and light, the heating/preheating speed is fast, the realization of the real constant temperature glue heating, the production efficiency is high, very suitable for the automation flowing water operation. The range of heating temperature is generally recommended to be between 25 degrees and 200 degrees. The actual temperature is adjusted by itself, usually over 120 degrees. Please select the metal cylinder.
1. In the mobile phone industry and tablet industry, the solid glue shall be heated until it is melted.
2. Preheat the glue in the electronic industry
Applicable to PUR hot melt glue, PUH hot melt glue, glue bar, glue block, high viscosity glue, etc.
1. The hot point glue machine is applicable to PUR hot melt glue or high-viscosity glue. It can melt solid glue or reduce viscosity through heating, which is convenient for the point glue operation.
2. Japan OMRON temperature control table temperature control, heating preheating temperature at a glance;
3. Two-in-one thermostat can heat and preheat at the same time to improve production efficiency;
4. The heating and preheating device is made of teflon heat insulation material, which can effectively maintain the internal temperature to make the thermostatic effect better, so as to achieve the heat insulation effect;
5. The heating head is made of pure copper material, featuring fast heating, uniform heating and high efficiency;
6. The company also has a single-head control box, which can be equipped with heating and preheating devices respectively, and can also be purchased arbitrarily. The specific specifications are as follows
Product name | Model | Remark |
Single head control box | ARW-30S | After the glue is heated/preheated, the temperature will rise to more than 100 degrees, so the outer part of the heating head will also generate higher heat. Therefore, thermal gloves should be worn during operation to avoid burning hands. |
Dual-head control box | ARW-30D | |
Teflon heater | ARW-30J | |
Teflon preheater | ARW-30Y |
Model | PID control mode |
The control mode | Platinum temperature resistance (PT100... |
Temperature sensor | 0℃-100℃ |
Temperature setting range | 30℃-100℃ |
The power supply voltage | AC220V 50HZ |
Power consumption | 9W |
Installation dimensions | 130*132*69 |
Weight | 1040 |
Alarm output | Relay contact |